'After' photo: conrete after cleaning, repairing and resurfacing, (had large cracks with areas of crass growing through concrete).
[ NEXT PICTURE ] [ QUIT ]

... using an industrial concrete pressure washing system, all loose concrete and debris were cleaned away. Soil and grass were removed and cracks were cut open until a proper bonding surface was achieved. All exposed conrete was etched and prepared for bonding, concrete acrylic patching compound was hand troweled to fill all low spots, and entire area was resurfaced in natural concrete then sealed.



Copyright ©1995-2012 Concrete Resurfacing Systems, all rights reserved.